Kingston KVR800D2E6/2G datasheet: parameters, advantages and application scenarios

Kingston Technology, as a leading global manufacturer of memory and flash memory products, launched the KVR800D2E6-2G memory module, which is a high-performance DDR2 SDRAM (Double Data Rate Second Generation Synchronous Dynamic Random Access Memory) designed for desktop computers. This article will explore the technical characteristics, application scenarios and impact of this memory module on computer system performance.

What is Kingston KVR800D2E6/2G?

KVR800D2E6-2G is a DDR2 memory module produced by Kingston with a capacity of 2GB and is suitable for computer systems that support DDR2 800MHz. The following is a detailed introduction to this memory module.

Kingston KVR800D2E6-2G model interpretation

• KVR: Kingston Value RAM series logo.
• 800: Indicates that the operating frequency of the memory stick is 800MHz (equivalent to the PC2-6400 standard).
• D2: Indicates that this is the second generation of double data rate (DDR2) memory.
• E6: Usually refers to the CL (CAS Latency, column address strobe delay) value of 6, that is, the time required to access the memory within the clock cycle.
• 2G: Indicates that the capacity of a single memory stick is 2GB.

Kingston KVR800D2E6-2G Technical Parameters

• Type: DDR2 SDRAM
• Capacity: 2GB
• Operating frequency: 800MHz (equivalent to PC2-6400)
• Voltage: 1.8V (standard DDR2 voltage)
• Timing: CL6-6-6-18 (CAS Latency, tRCD, tRP, tRAS)
• Number of pins: 240-pin DIMM (Dual Inline Memory Module), suitable for desktop motherboards.
• Error correction function: Non-ECC (Error-Correcting Code), suitable for general home and office use.
• Heatsink: Some models are equipped with a heatsink to enhance heat dissipation.

Detailed Features

• Data Transfer Rate: DDR2 800 (PC2-6400), which means the data transfer rate is 800MT/s (million transfers per second). Suitable for systems that require relatively high data bandwidth.
• Timing: Usually CL6 (CAS Latency 6), which indicates the delay between the memory receiving a read instruction and starting to transfer data. CL6 is the general timing of DDR2 memory modules, but it may vary in some versions.
• Size and Specifications: This memory module is a standard DIMM size and is suitable for desktop computers.
• Compatibility: The KVR800D2E6-2G is compatible with systems that support DDR2 800MHz memory, mainly for older desktop computer systems. Especially suitable for early Intel and AMD platforms.

Performance

• Since DDR2 memory technology is older than modern DDR3 and DDR4 technology, the performance of KVR800D2E6-2G is relatively low, suitable for older devices that require less memory bandwidth, or as an upgrade solution for some older desktop systems.

Technical advantages of Kingston KVR800D2E6-2G

1.High-speed transmission performance

KVR800D2E6-2G supports an operating frequency of 800MHz, which means it can complete two data transfers in each clock cycle, significantly improving data throughput. Compared with the previous generation of DDR memory, DDR2 not only increases the frequency limit, but also optimizes the internal architecture, reduces power consumption and improves stability.

2. Stable and reliable performance

Kingston is known for its strict quality control, and all memory sticks undergo multiple rounds of testing to ensure compatibility and reliability. KVR800D2E6-2G uses high-quality particles and advanced manufacturing processes, which can maintain stable performance during long-term high-load operation. In addition, it has passed a number of international certifications, such as RoHS (Restriction of Hazardous Substances Directive), and meets environmental protection requirements.

3. Low Latency and Timing

Despite the higher nominal frequency, the KVR800D2E6-2G still maintains a low CL6 latency and optimized timing settings (CL6-6-6-18). This balance allows it to respond quickly when handling complex tasks, reducing waiting time and improving overall system performance.

4. Wide Compatibility

Due to the standard specifications set by JEDEC (Solid State Technology Association), the KVR800D2E6-2G can work seamlessly with most mainstream chipsets and processor platforms. Whether it is an Intel or AMD architecture motherboard, users can easily find the right slot for installation without worrying about compatibility issues.

Application scenarios of Kingston KVR800D2E6-2G

1. Home Entertainment Center

For building a home multimedia computer or HTPC (Home Theater PC), the KVR800D2E6-2G provides enough capacity to smoothly play high-definition videos, run large games, and open multiple applications at the same time. Its stable performance and efficient heat dissipation design also ensure a comfortable experience for long-term use.

2. Office and Productivity Tools

In daily office environments, such as document editing, spreadsheet processing, web browsing and other tasks, 2GB of capacity is sufficient to meet the needs. More importantly, the low latency characteristics of KVR800D2E6-2G help speed up file loading and program startup time, improving work efficiency.

3. Development and Design Workstation

Although 2GB of single capacity may not be enough to cope with extremely complex graphics rendering or large-scale database operations, KVR800D2E6-2G still performs well for small and medium-sized development projects or light 3D modeling. Its high-speed transmission capacity and stability can help programmers and designers complete their work more efficiently.

4. Education and Training Environment

In the computer lab of a school or training institution, KVR800D2E6-2G is an ideal choice with its affordable price and reliable quality. It can provide students with a stable computing platform for activities such as learning programming languages and practicing office software skills.

Installation and maintenance of Kingston KVR800D2E6-2G

1. Installation steps

• Check compatibility: Confirm that the motherboard supports DDR2 memory, and consult the motherboard manual for specific memory slot layout and configuration rules.
• Power off: Unplug the computer power cord to avoid static electricity damaging components.
• Open the chassis: Carefully remove the chassis side panel to access the memory slot.
• Insert the memory stick: Align the KVR800D2E6-2G with the slot and press gently until the two side buckles automatically lock.
• Restore to the original state: Reinstall the chassis side panel, connect the power cord and other peripherals.

2. Maintenance recommendations

• Clean dust regularly: Use a compressed air can to blow dust around the memory stick to prevent accumulation and affect the heat dissipation effect.
• Monitor temperature: Monitor the memory temperature through BIOS or dedicated software to ensure that it does not exceed the safe range.
• Update BIOS/Driver: Keep the motherboard BIOS and related drivers up to date for best compatibility and performance optimization.

Kingston KVR800D2E6-2G Future Development and Alternative Options

As technology advances, DDR2 memory is gradually replaced by more advanced DDR3, DDR4, and even DDR5. However, on some older platforms, DDR2 is still the mainstream choice. If you are looking for an upgrade path, here are a few possible alternatives:

• DDR3 SDRAM: Higher frequency and lower voltage, resulting in better performance and energy efficiency.
• DDR4 SDRAM: Further improves frequency and bandwidth while reducing power consumption, suitable for modern high-performance computers.
• DDR5 SDRAM: The latest memory standard, providing unprecedented speed and capacity, but currently has high costs and limited compatibility.

Kingston KVR800D2E6-2G Datasheet

Kingston KVR800D2E6-2G Datasheet PDF

Using Kingston KVR800D2E6-2G requires compatibility check

When upgrading memory, users need to ensure that the motherboard supports DDR2 800MHz memory and the specifications of the memory slots match the memory modules. If you need to confirm compatibility, you can refer to the motherboard's user manual or check memory compatibility through online tools and Kingston KVR800D2E6-2G Datasheet.

FAQs

1.What type of memory is the KVR800D2E6-2G?

• The KVR800D2E6-2G is a DDR2 memory module from Kingston that operates at 800 MHz and is part of the PC2-6400 specification for motherboards that support DDR2.

2. What computer systems is the KVR800D2E6-2G suitable for?

• This memory module is suitable for older computers, especially desktops, workstations, and some older servers that support DDR2 800MHz. It is designed for DDR2 memory slots and is therefore not suitable for the latest DDR3 or DDR4 systems.

3. What is the capacity of the KVR800D2E6-2G?

• The Kingston KVR800D2E6-2G has a capacity of 2GB and is suitable for older desktop systems that require medium-capacity memory.

4. What is the timing (latency) of this memory module?

• The timing of KVR800D2E6-2G is CL6, that is, CAS Latency 6, which is a common timing for DDR2 800MHz memory modules.

5. Does KVR800D2E6-2G support overclocking?

• KVR800D2E6-2G is a standard non-overclocking memory with an operating frequency of 800 MHz. Although some motherboards and processors support overclocking, since it is designed as a standard memory, the overclocking capability is limited and may not be as good as other memory modules designed for overclocking.

6. What is the voltage of this memory module?

• The operating voltage of KVR800D2E6-2G is 1.8V, which is the standard voltage of most DDR2 memory.

7. Does KVR800D2E6-2G support dual-channel mode?

• KVR800D2E6-2G can be used with memory sticks of the same specification and supports dual channel mode. By pairing two memory sticks of the same capacity and frequency, higher bandwidth can be achieved and system performance can be improved.

8. How to install KVR800D2E6-2G memory stick?

The installation process is very simple:

• Make sure the computer is turned off and unplugged.

• Open the case and find the memory slot.

• Align the gold finger part of the memory stick with the slot, gently insert the memory stick into the memory slot, and press hard until the buckles on both sides of the memory stick are automatically fixed.
• Close the case, restart the computer, and check whether the system recognizes the memory.

Summary

The KVR800D2E6-2G is a standard DDR2 800MHz memory module suitable for older desktop systems. Although its performance cannot be compared with modern DDR3 or DDR4 memory, it is still a good choice for improving the performance and stability of older systems.

Statement:All articles (images, texts, audio) on this site are uploaded and shared by users, or integrated from relevant internet sources, only for user's learning. If your rights are violated, please contact the administrator to delete! Link to this article: https://www.jinftry.com